Denon AVRX1400H vs Onkyo TX-NR676 – decent receivers at equal price
Denon AVRX1400H — perfect receiver for perfect sound
Recently I’ve had a chance to test Denon in practice. It was an ordeal to install it because interface was complicated. I should have looked up online how to connect it with a 4K TV with HDR because it did not pass a signal through. Note that you have to unlock this function on the receiver.
But it was worthy of it! I can firmly claim that its sound is perfect, clear, and massively loud because I have not turned the volume up to 100%.
Denon AVRX1400H PROS:
The most important advantage for me is that it streams music from iTunes, Amazon, and Spotify. Moreover, it supports Wi-Fi.
I have found that voice commands via Alexa work perfectly.
I downloaded a digital version of the remote controller to control it via smartphone.
Denon AVRX1400H CONS:
It bothers me to control the sound manually each time, so it is a minor con, but it does not have MCACC Pro, which would be an additional convenience when it could tune sounding on its own and doesn’t need my participation.
I wanted to adjust it to my Samsung 8000 series TV, but it did not come off perfectly. Perhaps, it could just be a setting to adjust, but I noticed lateness between picture and sound.
I wish it had the TV screensaver option.
Onkyo TX-NR676 — unique receiver at an affordable price
5 days ago I checked up a perfectly packed Onkyo TX-NR676. So far, I can say that it has better sound quality than the previous one. In general, installation went without problems, diagrams lightened the process.
Onkyo TX-NR676 PROS:
It has almost all connector types including one at the front, thus it matched my devices because most of them are on HDMI ports.
Built-in Spotify, streaming 4k and UHD 4K discs, puts it higher in my own rating.
It was pleasant to discover that MCACC Pro adjusted to the room acoustics and equalized response.
Onkyo TX-NR676 CONS:
Switching from Zone 1 to 2, which cannot play sources connected by HDMI through Zone 2 confused me. Then I understood that it was possible to use the zone 2 speaker terminals or my own amp.
I checked a sleep timer, but an only one access to it is through the main setup in the “Hardware” sub-menu so the TV has to be on.
I didn’t notice right away that it gets hot fast, thus I have to keep an eye on it.
For me, it is not essential, but pay attention to HDMI 2.1 cable, which is not easy to come across yet but you will need it if you want 4k HDR.
Results of Denon AVRX1400H vs Onkyo TX-NR676 detailed examination
If you face the question which one to choose, Denon AVRX1400H or Onkyo TX-NR676, you can rely on my own receiver comparison because I have tested both.
Denon can be upscaling via HDMI and is smaller. Meanwhile, Onkyo is more powerful (700 versus 560 W) and has more HDMI inputs/outputs (7/2) in comparison to Denon (6/1).
The main disadvantage, which is not shown in a comparison chart, is Denon’s complicated instruction and interface. However, Onkyo has rare HDMI 2.1 cable.
Other differences Onkyo TX-NR676 vs Denon AVRX1400H are not so significant.
Finally, if you are in two minds, Onkyo TX-NR676 or Denon AVRX1400H, choose Onkyo if you need a powerful receiver, but be ready for searching for a necessary cable or pick Denon, which works with HDMI, but you will wreck your brain how to install it.