Specification | Audio Technica AT-LP60-BT | Stanton ST.150 MKII |
---|---|---|
Cartridge | ||
Appropriate Needle Pressure, G | 1,5 | |
Type | dual magnet | megnetic |
Supplied Headshell Weight, G | 5,7 | |
Motor | ||
Torque | 4.5 kg | |
Speed, Rpm | 33.3, 45 | 33, 45, 78 |
Platter Type | aluminum diecast | dampened |
Drive Method | belt | direct |
Wow & Flutter (wrms), % | 0.25 | 0.1 |
Controls | ||
Pitch Variation, % | 8, 25, 50 | |
Pitch Control | ||
Operation Type | full automatic | full manual |
Braking System | electronic | electronic |
Dimensions | ||
Size, Cm/inches | 9.7 x 36 x 35.6/3.8 x 14.7 x 14.1 | 14.3 x 45.2 x 37/5.6 x 17.7 x 14.5 |
Weight, Kg/pounds | 2.9/6.6 | 8.6/18.9 |
Power | ||
Power Consumption, W | 3 | |
Features | ||
Other | has not | |
45 Rpm Adapter | ||
Dust Cover | ||
Sound | ||
Output Level | Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec. Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec | |
Gain | 36 | |
Signal To Noise Ratio, Db | 50 | 60 |
Frequency Response, Hz | 20 - 20000 | |
Stylus | ||
Model | ATN3600L | |
Type | dual magnet | megnetic |
Replaceable | ||
Connections | ||
Other | has not | |
Rca | 1 | 1 |
Usb | 1 | 1 |