Specification | Dayton Audio SUB-1000L | Sony SA-SW3 |
---|---|---|
Material | ||
Woofer Composition | polymer | Omnidirectional |
Body Material | MDF | |
Enclosure Type | vented | Bass-Reflex |
Colors | black | BLACK |
Power | ||
Nominal Output Power (rms), W | 100 | |
Audio Amplifier Output Power, W | 100 | |
Maximal Output Power (rms), W | 100 | 200 |
Driver | ||
Driver Size, In | 10 | 6.3 |
Driver Quantity | 1 | 1 |
Port Placement | down firing | deep |
Driver Placement | down firing | front panel |
Connections | ||
Bi-amp | ||
Xlr Outputs (pair) | ||
Xlr Inputs (pair) | ||
Rca Outputs | ||
Rca Stereo Line Level Inputs (pair) | 1 | |
Rca Lfe Inputs | 1 | |
Speaker Inputs (pair) | 2 | |
Speaker Outputs (pair) | 2 | |
General | ||
Detachable Grilles | ||
Amplification Type | active | Active |
Controls | ||
Main Power Switch | ||
Low-pass Filter | ||
Subwoofer Phase | ||
Volume | ||
Audio Performance | ||
Crossover Frequency, Hz | 40-140 | |
Frequency Response, Hz | 32-140 | 28-200 |
Impedance, Ohm | 8 | |
Sensitivity, Db | 85 | |
Dimensions | ||
Weight, Kg/pounds | 11.6/25.7 | 9.9/22 |
Dimensions (h X W X D), Cm/in | 69.6 x 43.2 x 23/27 x 17.1 x 9 | 20.3 x 38.4 x 40.3/8 x 15.13 x 15.88 |