| Specification | Klipsch R-10SW | Kicker 43DCWR122 |
|---|---|---|
| Controls | ||
| Low-pass Filter | ||
| Subwoofer Phase | ||
| Volume | Surround Volume | |
| Main Power Switch | ||
| Audio Performance | ||
| Frequency Response, Hz | 32-120 | |
| Impedance, Ohm | 8 | 2 |
| Sensitivity, Db | 112 | |
| Crossover Frequency, Hz | 40-160 | |
| Connections | ||
| Rca Outputs | ||
| Rca Stereo Line Level Inputs (pair) | 1 | |
| Rca Lfe Inputs | 1 | |
| Speaker Inputs (pair) | ||
| Speaker Outputs (pair) | ||
| Bi-amp | ||
| Xlr Outputs (pair) | ||
| Xlr Inputs (pair) | ||
| Dimensions | ||
| Weight, Kg/pounds | 11.6/25.5 | 77.7 pounds |
| Dimensions (h X W X D), Cm/in | 35.5 x 31.7 x 39.8/14 x 12.5 x 15.7 | 32.28 x 17.32 x 16.14 inches |
| Material | ||
| Enclosure Type | vented | |
| Colors | black | Black |
| Woofer Composition | polymer | |
| Body Material | MDF | |
| Power | ||
| Audio Amplifier Output Power, W | 150 | 1000 |
| Maximal Output Power (rms), W | 300 | 2000 |
| Nominal Output Power (rms), W | 150 | 1000 |
| Driver | ||
| Port Placement | back side | Back |
| Driver Placement | front panel | Back |
| Driver Size, In | 10 | 12 |
| Driver Quantity | 1 | 2 |
| General | ||
| Detachable Grilles | ||
| Amplification Type | active |
