May 20, 2019
I had the opportunity to take the Polk Audio PSW505 on my test. This model with a 12-inch driver from the PSW subwoofer series. Polk Audio produces high-quality products that have always received war...Read More
Both speakers are quite powerful and they can fill a large room with a pure and deep bass sound. However, if we compare BIC F12 vs Polk audio PSW505 in terms of power, we will see a slight difference – 475 W BIC versus 460 W Polk. The difference is not that big and you may not even notice it.
Nevertheless, there are other features, we need to pay attention to. One of them is that BIC has Dolby Pro Logic, Dolby Digital/DTS inputs. BIC also features gold-plated terminals which can help avoid noises.
Both models have many adjustable parameters, like crossover, volume, phase switch. It can help you blend the subwoofer with other speakers and build a perfect sound setup. Both devices are magnetically shielded, which means they will not affect any devices located nearby. These two models are very powerful and they would be a perfect option for large rooms.
The main advantage of Polk Audio PSW505 is that you can adjust different parameters to make it sound as you wish. The main disadvantage is that the amplifier is not reliable.
The main advantage of BIC F12 is its high dynamic power that is combined with distortion-free, deep sound. The disadvantage of this model is that it is not well controlled, sometimes you may need to crank the volume up high to start hearing it. Moreover, some customers claim that it is useless to set the volume higher than 50% since it produces no difference at all.
If you need to choose between BIC F12 or Polk PSW505, then you should keep in mind that BIC has more possibilities in terms of inputs (Dolby Pro Logic, DTS, etc.), but if you do not need that amount of inputs and you are going to use the LFE input, then PSW505 will be a good option.
This subwoofer has a special venting slot that guarantees a good bass response by eliminating turbulence and noises. A 12-inch throw driver assures longer excursion preserving perfect linearity. The MDF construction is solid and it suppresses any resonance that makes output sound distortion-free.
Setting the switch to Dolby Pro Logic utilizes the Sub's built-in crossover was Dolby Digital by-passes it and utilizes your receivers LFE filtering. You choose the mode, based on your receiver and the type of signal you are feeding it. It was built using the patented BIC “Venturi” vent technology that excludes any port noise. It also features gold-plated terminals that can assure noise-free signal.
The BIC America F12 is better subwoofer in this comparison. Check BIC America F12 price