Specification | Jensen JTA-222 | Audio-Technica AT-LP5 |
---|---|---|
Stylus | ||
Type | moving magnet (MM) | moving magnet (MM) |
Replaceable | ||
Model | LP GEAR | AT95EX |
Sound | ||
Signal To Noise Ratio, Db | 50 | |
Frequency Response, Hz | 20 - 22000 | |
Output Level | Pre-amp “PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec. Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec | |
Gain | 36 | |
Connections | ||
Other | has not | has not |
Rca | 1 | 1 |
Usb | - | 1 |
Cartridge | ||
Supplied Headshell Weight, G | 10 | |
Appropriate Needle Pressure, G | 2 | |
Type | moving magnet (MM) | moving magnet (MM) |
Motor | ||
Wow & Flutter (wrms), % | 0.2 | |
Torque | >1.6 kgf-cm | |
Speed, Rpm | 33.3, 45, 78 | 33.3, 45 |
Platter Type | plastic | aluminum diecast |
Drive Method | belt | direct |
Controls | ||
Braking System | electronic | electronic |
Pitch Variation, % | ||
Pitch Control | ||
Operation Type | manual | automatic |
Dimensions | ||
Weight, Kg/pounds | 2.5/5.5 | 10.5/23.1 |
Size, Cm/inches | 12.4 x 31.7 x 28.2/4.9 x 12.5 x 11.1 | 15.7 x 45 x 35.2/6.1 x 17.7 x 13.8 |
Power | ||
Power Consumption, W | 3 | 6 |
Features | ||
Other | has not | has not |
45 Rpm Adapter | ||
Dust Cover |