The SVS SB-2000 subwoofer is the SVS best-selling unit with a combination of power, precision, flawless transient response, uncompromising musicality and intelligent processing in a relatively compact package that integrates seamlessly into any system. Featuring Ultra Series technology, the SB-2000 lives up to expectations and delivers unrivaled performance for an airtight subwoofer anywhere in its price range.
The SVS SB-2000 vs Klipsch R-112SW is based on the newly designed 12-inch 2000 Series driver with two high-quality ferrite magnets and an FEA-optimized motor for almost no performance distortion even at the most extreme drive levels.
The DSP Sledge STA-500D Amplifier for SB-2000 Subwoofer boasts features typically found in subwoofers that cost two or three times the cost. 500 W conservatively rated for RMS and peak dynamic power over 1,100 watts. The advanced DSP in the amplifier includes an array of filters and volume, gain and phase controls for fine-tuning performance.
Compare those facts versus the R-112SW’s performance. The Klipsch R-112SW is equipped with a 10-inch Cerametallic copper driver that provides low-frequency reproduction with minimal distortion. The built-in digital amplifier provides ample power with high performance and fidelity. The low crossover and phase control allows you to clearly synchronize the low-frequency sound of the subwoofer with the sound of the remaining speakers of the Klipsch system, as well as to establish the optimal level of bass.
The R-112SW has a robust veneered MDF body with a matte finish. On/off indicator on the front panel.
The SVS SB-2000 subwoofer is available as a compact cube-shaped device. The beautiful appearance of the device is preserved even when the dust screen is removed. The body of the presented subwoofer model is equipped with four miniature legs. Dark coloring gives the device the appearance of a remarkable household appliance. The panel for connecting inputs and outputs is presented at the rear of the device.
Specification | Klipsch R-112SW | SVS SB-2000 |
---|---|---|
Connections | ||
Speaker Outputs (pair) | ||
Bi-amp | ||
Xlr Outputs (pair) | ||
Xlr Inputs (pair) | ||
Rca Outputs | 1 | |
Rca Stereo Line Level Inputs (pair) | 1 | 1 |
Rca Lfe Inputs | 1 | 1 |
Speaker Inputs (pair) | ||
Material | ||
Colors | black | black ash, gloss black |
Woofer Composition | polymer | aluminum |
Body Material | MDF | MDF |
Enclosure Type | vented | sealed |
Power | ||
Maximal Output Power (rms), W | 600 | 1100 |
Nominal Output Power (rms), W | 300 | 500 |
Audio Amplifier Output Power, W | 300 | 500 |
Driver | ||
Driver Placement | front panel | front panel |
Driver Size, In | 12 | 12 |
Driver Quantity | 1 | 1 |
Port Placement | front panel | has not |
General | ||
Detachable Grilles | ||
Amplification Type | active | active |
Controls | ||
Main Power Switch | ||
Low-pass Filter | ||
Subwoofer Phase | ||
Volume | ||
Audio Performance | ||
Crossover Frequency, Hz | 40-160 | 50-160 |
Frequency Response, Hz | 24-125 | 19-220 |
Impedance, Ohm | 8 | |
Sensitivity, Db | 118 | |
Dimensions | ||
Weight, Kg/pounds | 22.1/48.7 | 15.8/34.8 |
Dimensions (h X W X D), Cm/in | 41.4 x 39.4 x 46.3/17.4 x 15.5 x 18.2 | 37 x 36 x 43/14.6 x 14.2 x 17.1 |
User Manual | ||
Manual | r-112sw.pdf | sb-2000.pdf |