The Klipsch R-10SW vs Klipsch Reference R-10SWi comparison shows that these models don’t have major differences when it comes to the output power. The nominal output power is the same – 150 W for both models. The maximal output power is 300 W for both subwoofers as well. Nevertheless, there are some differences between these models.
The Klipsch Reference R-10SWi vs Klipsch R-10SW performance comparison proves that both models have many common performance characteristics – both models have the same sensitivity – 112 dB, the same impedance – 8 Ohm. These models also have the same frequency response – 32-120 Hz. However, the difference becomes apparent when we compare the crossover frequency – 40-160 Hz for the Klipsch R-10SW versus 90-150 Hz for the Reference R-10SWi.
The main advantage of the Klipsch Reference R-10SWi is its wireless connection capability – it uses the Wi-Fi protocol. The pre-paired transmitter assures the stable and clear audio output. These models allow you controlling volume, low pass crossover frequency, and phase.
These models use the high-grade all-digital amplifier to output the rich bass sound.
The manufacturer used the same approach and the Klipsch R-10SW vs Reference R-10SWi design comparison proves it. These models have the usual Klipsch design solution – the copper-spun front-firing woofer. These models have the 10-inch drivers covered by grills. The venting ports are located on the back panels. These models have Line/LFE inputs. The back panel also features the dials and the switches to control the subwoofers. These models are easy to use – the ports and the dials are easy to access.
These models have four feet so they standstill on any surface. The bodies are made of MDF – they are light and rigid, so you will get no unnecessary noise or vibrations. The models are the same in terms of dimensions and weight.
Specification | Klipsch R-10SW | Klipsch Reference R-10SWi |
---|---|---|
Connections | ||
Speaker Outputs (pair) | ||
Bi-amp | ||
Xlr Outputs (pair) | ||
Xlr Inputs (pair) | ||
Rca Outputs | ||
Rca Stereo Line Level Inputs (pair) | 1 | 1 |
Rca Lfe Inputs | 1 | 1 |
Speaker Inputs (pair) | ||
Material | ||
Colors | black | black |
Woofer Composition | polymer | polymer |
Body Material | MDF | MDF |
Enclosure Type | vented | vented |
Power | ||
Maximal Output Power (rms), W | 300 | 300 |
Nominal Output Power (rms), W | 150 | 150 |
Audio Amplifier Output Power, W | 150 | 150 |
Driver | ||
Driver Placement | front panel | front panel |
Driver Size, In | 10 | 10 |
Driver Quantity | 1 | 1 |
Port Placement | back side | back side |
General | ||
Detachable Grilles | ||
Amplification Type | active | active |
Controls | ||
Main Power Switch | ||
Low-pass Filter | ||
Subwoofer Phase | ||
Volume | ||
Audio Performance | ||
Crossover Frequency, Hz | 40-160 | 90-150 |
Frequency Response, Hz | 32-120 | 32-120 |
Impedance, Ohm | 8 | 8 |
Sensitivity, Db | 112 | 112 |
Dimensions | ||
Weight, Kg/pounds | 11.6/25.5 | 11.6/25.5 |
Dimensions (h X W X D), Cm/in | 35.5 x 31.7 x 39.8/14 x 12.5 x 15.7 | 35.5 x 31.7 x 39.8/14.5 x 12.5 x 15.7 |
User Manual | ||
Manual | r-10sw.pdf | r-10swi.pdf |