The main advantage of the PSW110 is its higher nominal and maximal power output. The Polk Audio PSW110 vs Polk Audio PSW10 power comparison shows that the nominal power output of the PSW10 is 50 W – compare it with 100 W that outputs the PSW110. The maximal power output of the PSW10 is 100 W, while the PSW110 maximal output power is 200 W.
The PSW110 impedance is 8 Ohm, while the PSW10 impedance is 4 Ohm. Both models provide you with a deep and clear bass sound. These models aren’t very expensive and they will cost you around $130 or even less.
The PSW110 would be slightly easier to integrate into your audio setup, as the Polk Audio PSW10 vs Polk Audio PSW110 performance comparison shows that this model has a better frequency response – the PSW110 response is 32-250 Hz, while the PSW10 response is 35-200 Hz. The PSW110 crossover frequency is 60-160 Hz versus 80-160 Hz that is the PSW10 frequency.
These two solutions have the dials that allow you to control volume and low pass. There is also a switch to the control phase. Both models have the “auto-on” feature.
The Polk Audio PSW10 vs PSW110 design comparison shows that the manufacturer used two different approaches. Both models are 10-inch subwoofers and both are vented to output the deep sound, but the PSW10 is a front-firing solution and the PSW110 is a down-firing model. The PSW10 model was built using the laser-based measuring Klippel technology.
Both subwoofers have 4 feet. The PSW110 doesn’t have a detachable front grill. Traditionally, all the ports, dials and switches are located on the back panel. All the ports and dials are easy to access.
The dimensions are 16.2x14x14.4 in. for the PSW10 and 14x14x17 in. for the PSW110. The weight is 26 and 33.5 lbs. respectively.
Specification | Polk Audio PSW10 | Polk Audio PSW110 |
---|---|---|
Connections | ||
Speaker Outputs (pair) | 2 | 2 |
Bi-amp | ||
Xlr Outputs (pair) | ||
Xlr Inputs (pair) | ||
Rca Outputs | ||
Rca Stereo Line Level Inputs (pair) | 1 | 1 |
Rca Lfe Inputs | 1 | |
Speaker Inputs (pair) | 2 | 2 |
Material | ||
Colors | black, brown, silver | black, cherry |
Woofer Composition | polymer | polymer |
Body Material | MDF | MDF |
Enclosure Type | vented | vented |
Power | ||
Maximal Output Power (rms), W | 100 | 200 |
Nominal Output Power (rms), W | 50 | 100 |
Audio Amplifier Output Power, W | 50 | 200 |
Driver | ||
Driver Placement | front panel | front panel |
Driver Size, In | 10 | 10 |
Driver Quantity | 1 | 1 |
Port Placement | front panel | down firing |
General | ||
Detachable Grilles | ||
Amplification Type | active | active |
Controls | ||
Main Power Switch | ||
Low-pass Filter | ||
Subwoofer Phase | ||
Volume | ||
Audio Performance | ||
Crossover Frequency, Hz | 80-160 | 60-160 |
Frequency Response, Hz | 35-200 | 32-250 |
Impedance, Ohm | 4 | 8 |
Sensitivity, Db | 85 | 85 |
Dimensions | ||
Weight, Kg/pounds | 11.8/26 | 15.2/33.5 |
Dimensions (h X W X D), Cm/in | 36.5 x 35.6 x 41/16.2 x 14 x 14.4 | 36.8 x 36.2 x 43.2/14 x 14 x 17 |
User Manual | ||
Manual | psw10.pdf | psw110.pdf |