Easily customizable to fit around your pool, the Pool Fence DIY mesh pool safety system from Life Saver helps protect against accidental falls into your pool and can be installed by yourself (no contractor required). This 12-foot long section of fence has a 4-foot height (recommended by the Consumer Product Safety Commission) to help make your backyard pool area a safer place for children.In addition to concrete and subtantial surfaces, Pool Fence DIY by Life Saver can be installed into pavers, on sand/crushed stone, on a wood deck, and into dirt, rock gardens, and other loose surfaces. The fence is constructed of industrial-strength Textilene PVC-coated nylon mesh, which has a strength rating of 387 pounds per square inch. The UV-resistant mesh provides years of use in all weather conditions. The stainless steel pins are easily inserted into the supp;ied sleeves (after installation) and exceeds most local safety requirements. The fence can be removed when no children are present.To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 to 36 inches of space for walking and cleaning. After determining your total footage, divide by 12 to calculate the correct number of sections needed. When installed, poles are spaced out every 36 inches.This package includes a 4-foot high x 12-foot long section of mesh pool fence with five integrated poles (each with a 1/2-inch stainless steel peg), deck sleeves/caps, safety latch, and template (gate sold separately). Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included). The optional Pool Fence DIY Drill Guide (sold separately) takes the guesswork out of the drilling process for proper in-ground installation. Pool Fence DIY offers 7-day-a-week installation support by phone, and is backed by a limited lifetime warranty.A family owned and operated company based in Delray Beach, FL, Life Saver has been has been keeping little feet on solid ground for over 25 years. In addition to Pool Fence DIY, Life Saver offers a contractor-installed Pool Fence option in most populated areas of the country. Non-corrosive latching system without sharp hooks or points.

• Easy-to-install, do-it-yourself fencing kit helps keep children safe from accidental falls into your pool
• Industrial-strength mesh fence at recommend U.S. CPSC height of 4 feet with 5 integrated poles with a 1/2-inch stainless steel pin
• Fence can be easily removed when no children are present and re-inserted when needed
• Package includes 12-foot section of fencing, 5 poles (already assembled/attached), deck sleeves/caps, safety latch, and template; gate sold separately
• Backed by a limited lifetime warranty; installation requires rotary hammer drill and long shaft masonry bit (not included); 7-day-a-week phone support