Specification | Audio-Technica AT-LP120 | Pyle PLTTB1 |
---|---|---|
Stylus | ||
Model | ATN95E | |
Type | dual magnet | moving magnet (MM) |
Replaceable | ||
Sound | ||
Gain | 36 | |
Signal To Noise Ratio, Db | 50 | 55 |
Frequency Response, Hz | 20 - 20000 | |
Output Level | Pre-amp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec. Pre-amp "LINE": 150 mV nominal at 1 kHz, 5 cm/sec | |
Features | ||
Dust Cover | ||
Other | has not | has not |
45 Rpm Adapter | ||
Connections | ||
Other | has not | has not |
Usb | 1 | - |
Rca | 1 | 1 |
Dimensions | ||
Weight, Kg/pounds | 10.6/23.5 | 3.1/6.6 |
Size, Cm/inches | 15.2 x 45.2 x 35.3/ 6 x 17.8 x 13.9 | 12 x 43 x 37/4.7 x 17 x 14.5 |
Motor | ||
Wow & Flutter (wrms), % | 0.2 | 0.25 |
Torque | >1.6 kgf-cm | |
Speed, Rpm | 33.3, 45, 78 | 33.3, 45 |
Platter Type | aluminum diecast | plastic |
Drive Method | direct | belt |
Controls | ||
Braking System | electronic | electronic |
Pitch Variation, % | +/-10 or +/-20 | +/-8 |
Pitch Control | ||
Operation Type | full manual | manual |
Cartridge | ||
Supplied Headshell Weight, G | 2,5 | |
Appropriate Needle Pressure, G | 1,5 | |
Type | dual magnet | moving magnet (MM) |
User Manual | ||
Manual | at-lp120.pdf | plttb1.pdf |
Power | ||
Power Consumption, W | 11 |